604012 | 2 Inch Dodge Suspension Kit - 2.0 F / 1.0 R

The TRAXDA 604012 lift kit raises the front of your Ram 1500 4x4 2" and the rear 1".
This kit enhances the ride of your SUV as well as increasing the ground clearance and providing room for larger wheel and tires.

The Traxda 604012 kit is unique in that it uses a spacer to preload the spring ( the ride is approx 10% stiffer) to get the correct amount of free sag or down travel in combination with both front strut mount spacers and rear coil spring spacers.
This increase in front preload drastically improves the drivability in both on and off road conditions and improves handling in all weather!

The Traxda 604012 is also designed to eliminate the Ram 1500 4x4 driveline vibration most other leveling kits cause on the Dodge Ram 1500’s.

Every Traxda 604012 lift kit is Made in the USA with USA Mill Certified Steel and laser cut to precision tolerances using OEM drawings.
Each kit is welded using the latest US Made welders and triple checked to ensure proper fitment.
We powder coat every part in-house to make sure the finish lasts as long as your truck does!

Each kit contains
two front strut spacers
two front strut plates
two rear spring spacers
all hardware needed
detailed instructions
complete alignment specs.

Recommended installation time is approx 3 hours + alignment
33" tall tires are commonly used on stock offset style wheels.

Part number: 604012
• Front: 2"
• Rear: 1"
• Allows for up to 33” Tires on Stock Wheels
• Professional install time: 3 hours +
• Designed to retain the stock ride quality
• Aftermarket shocks are NOT required
• Alignment specs included
• MADE IN THE USA!