909025 | 3 Inch Toyota Suspension Lift Kit - 3.0 F / 1.0 R

The TRAXDA 909025 / 9925 3" lift kit raises your Toyota Tundra 3” in the front and 1” in the rear.
This kit enhances the ride of your pickup as well as increasing the ground clearance and providing room for larger wheel and tires.

The Traxda 909025 / 9925 kit is unique in that it uses a steel spacer to preload the spring ( the ride is approx 10% stiffer) to get the correct amount of free sag or down travel in combination with both front strut mount spacers and rear coil spring spacers.
This increase in front preload drastically improves the drivability in both on and off road conditions and improves handling in all weather!

Every Traxda 909025 / 9925 3” lift kit is Made in the USA with USA Mill Certified Steel and laser cut to precision tolerances using OEM drawings.
ach kit is welded using the latest US Made welders and triple checked to ensure proper fitment.
We powder coat every part in-house to make sure the finish lasts as long as your truck does!

Each kit contains
two front strut spacers
two front strut plates
plated u-bolts
two rear blocks
all hardware needed
detailed instructions
complete alignment specs.

Recommended installation time is approx 3 hours + alignment
33” tall tires are commonly used on ‘0’ offset style aftermarket wheel.

Part number: 909025
• Front: 3"
• Rear: 1”
• Allows for up to 33” Tires on Stock Wheels
• Professional install time: 3 hours +
• Designed to retain the stock ride quality
• Aftermarket shocks are NOT required
• Alignment specs included
• MADE IN THE USA!