K378 | Superlift 4 inch Suspension Lift Kit with Shadow Shocks (1980-1996 Bronco 4WD)

This is a complete coil spring suspension lift kit for the 1980 -1996 Ford Bronco 4WD
Provides 4” lift height
Includes rear blocks, front and rear Superlift shocks

What does it include?
Coil springs, radius arm brackets, axle pivot brackets, shocks, drop pitman arm, rear block and u-bolt kit, and all specific hardware required
Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

This is the SUPERLIFT 4 Inch suspension lift kit for the 1980-1996 Ford Bronco. With a SUPERLIFT suspension and a little more tire, your classic Ford Bronco will have an awesome stance and better off-road ground clearance.

This SUPERLIFT system is designed for Ford Bronco owners looking to gain more ground clearance, wheel travel flexibility, and a level profile. Our lift system addresses all of your lift kit needs in terms of product quality, durability, craftsmanship, and price. It includes everything you need to lift your legendary Ford Bronco.

Features:
SUPERLIFT engineers develop these 4-inch front lift coil springs to give you the best ride and handling characteristics available. They’re pre-set to reduce fatigue in the steel, minimize settling and guarantee a consistent ride height. Shot-peened to increase tensile strength and allow maximum wheel travel without sacrificing the life of the springs.
In the rear, SUPERLIFT provides a 3 inch rear block kit complete with proven cast steel blocks, U-bolts, nuts, and washers.
Included in this system is a set of four (4) Superlift shocks absorbers. Superlift shock absorbers are designed to provide excellent ride quality, durability, and longevity. They feature 10-stage, velocity-sensitive valving for maximum control on or off-road without sacrificing a comfortable ride. Shock resistance is continually adjusted, depending on the terrain and vehicle speed.
The 4-inch lift for this ‘lift friendly’ Ford design is simple and straight-forward. Included are detailed instructions suitable for do-it-yourselfers (DIY) or for installers alike.

NOTE:
Installation time: 9 hours
Difficulty level: 3 of 5

If extended length brake lines are not used, the factory brake hoses and steel lines must be re-routed. Using extended hoses makes for a much simpler and cleaner installation.

NOTE: If your Ford Bronco is factory-equipped with auxiliary (dual) front shocks also order quantity one (1) #8280 and one (1) #8300 Superide shocks.

NOTE: Optional extended length brake hoses recommended. Our front sway bar relocation kit is suggested if full suspension articulation is desired. The optional Superunner Steering System conversion is Highly Recommended for Optimal Steering Performance.