202012 | Traxda 1.5 Inch Rear Lowering Arms (2017-2023 Ridgeline)

2017-2023 Honda Ridgeline- Rear 1.5″ lowering arms

Part number: 202012

UPDATED 11-30-2023 to 3/16 plate , 150% thicker than stock . They are much stronger than stock, and will lower the rear of your Honda Ridgeline by 1.5 inches, which will make it level with the front. We make them in our facility in Tucson AZ USA. All parts are laser cut, welded and powder coated in house. We are usually shipping these arms with 1-2 days of placing your order.

The arms are very quick and easy to install, just jack up the rear of the truck on jack stands and remove the three OEM bolts and the arm.

Replace the stock arm with the Traxda arm, using the  supplied hardware. 30-60 minutes installation time.

White truck has the arms and also is air bagged with a custom system

You should get your alignment checked after installation to make sure the toe is set correctly. Toe is the major tire wear angle to worry about.

It should align to stock angles, if you use it conjunction with air bags or lowering springs you may find yourself with negative camber in the rear. Many customers have combined our arm with other lowering methods with success.

The arms also fit the Honda Pilot and Honda Passport, but you should know that the rear will be lower than the front, and we would suggest you put lowering springs or airbags in the front if you have a Pilot or Passport.