Home - Return to Previous Page
38430 | Rough Country 5 Inch Lift Kit With Premium N3 Shocks AISIN For Diesel Ram 3500 4WD | 2019-2023
2019-2024 Ram 3500 4WD | Diesel With AISIN Transmission
38430
Pricing:
$2,234.95
Description
5 Inch Lift Kit Diesel |AISIN | Ram 3500 4WD (2019-2024)
Unmatched Height. Compliment your RAM 3500's aggressive, good looks with Rough Country's new 5-inch Lift Kit with lifted coil springs. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride quality that'll make other Ram owners wonder where you got yours from! Durable design.When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, durable rubber bushings for maximum vibration absorption. This kit also includes a skid plate and a set of front, lifted coil springs for unparalleled ride quality from your lifted Ram 3500. Installation and Warranty. Our 5-inch Suspension Lift Kit provides an easy bolt-on installation with minor cutting and drilling required. Install time is just 6-8 hours, and all the hardware and instructions are included in the kit. Plus, our suspension lift kits are backed by Rough Country's Limited Lifetime Replacement Warranty, so you can rest assured that your investment is protected. So order your kit today and get your Ram 3500 looking its best!
Features
- Increased ground clearance.
- Track bar bracket keeps the front axle properly centered.
- Radius Arms offer a more factory-like angle and feature a durable Rubber Bushing for maximum vibration absorption.
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Notes - Important
- Requires removal of Transfer case for clocking ring install for correct front driveline geometry.
- Does NOT fit 'Power Wagon' models
- Fits single rear wheel and dual real wheel models.
- Rear wheels may require additional dually wheel spacers to run 12.50in wide tire.
- ONLY fits diesel models.
- Requires minor cutting.
- On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration.
- Does NOT fit cab & chassis models.
Specs
SKU | 38430 |
---|---|
Est. Install Time | 6-8 hours |
Application List
2019-2023 4WD Ram 3500
Notes - Important
Requires removal of Transfer case for clocking ring install for correct front driveline geometry.
Does NOT fit 'Power Wagon' models
Fits single rear wheel and dual real wheel models.
Rear wheels may require additional dually wheel spacers to run 12.50in wide tire.
ONLY fits diesel models.
Requires minor cutting.
On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration.
Does NOT fit cab & chassis models.
Notes - Important
Requires removal of Transfer case for clocking ring install for correct front driveline geometry.
Does NOT fit 'Power Wagon' models
Fits single rear wheel and dual real wheel models.
Rear wheels may require additional dually wheel spacers to run 12.50in wide tire.
ONLY fits diesel models.
Requires minor cutting.
On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration.
Does NOT fit cab & chassis models.
Components
FRONT
Lifted Coil springs
Radius arms
Track Bar bracket
Transmission crossmember
Clocking ring
Sway-bar brackets
Pitman arm
Carrier bearing shims
Hardware
REAR
Rear lift blocks
U-bolts
Hardware
SHOCKS
(4) Premium N3 Series
Lifted Coil springs
Radius arms
Track Bar bracket
Transmission crossmember
Clocking ring
Sway-bar brackets
Pitman arm
Carrier bearing shims
Hardware
REAR
Rear lift blocks
U-bolts
Hardware
SHOCKS
(4) Premium N3 Series
Tires & Wheels
Tire | Wheel | Bolt Pattern | Offset | Note |
---|---|---|---|---|
37x12.50R17 | 17x9 | 8x6.5/8x165.1 | -12 | - |
37x12.50R17 | 17x9 | 8x6.5/8x165.1 | +0 | - |
37x12.50R17 | 17x9 | 8x6.5/8x165.1 | +1 | - |
37x12.50R18 | 18x9 | 8x6.5/8x165.1 | -12 | - |
37x12.50R18 | 18x9 | 8x6.5/8x165.1 | +0 | - |
37x12.50R18 | 18x9 | 8x6.5/8x165.1 | +1 | - |
37x12.50R18 | 18x10 | 8x6.5/8x165.1 | -25 | Minor Trimming |
37x12.50R18 | 18x10 | 8x6.5/8x165.1 | -19 | Minor Trimming |
37x12.50R18 | 18x10 | 8x6.5/8x165.1 | -18 | Minor Trimming |
37x12.50R20 | 20x9 | 8x6.5/8x165.1 | -12 | - |
37x12.50R20 | 20x9 | 8x6.5/8x165.1 | +0 | - |
37x12.50R20 | 20x9 | 8x6.5/8x165.1 | +1 | - |
37x12.50R20 | 20x10 | 8x6.5/8x165.1 | -25 | Minor Trimming |
37x12.50R20 | 20x10 | 8x6.5/8x165.1 | -19 | Minor Trimming |
37x12.50R20 | 20x10 | 8x6.5/8x165.1 | -18 | Minor Trimming |
37x12.50R22 | 22x10 | 8x6.5/8x165.1 | -19 | Minor Trimming |
37x12.50R22 | 22x10 | 8x6.5/8x165.1 | -18 | Minor Trimming |
Details
- 38430
- 38430
- 840269914140
- Rough Country
- New
Categories
Shipping Information
- Item Requires Shipping
- 149.0 lbs.
- W13.5000” x H6.7500” x L46.2500”
- Free Ground Shipping | Exclusions Apply*