CSK-G9-2 | CST Suspension 9 to 11 Inch Stage 2 Suspension System (2001-2010 Silverado, Sierra 2500 HD, 3500 HD 2WD/4WD)

STAGE 1 CST 9-11″ LIFT KIT FOR THE 2001-2010 CHEVY / GMC HD TRUCKS COMES WITH EVERYTHING YOU NEED TO LIFT THE FRONT OF YOUR HD.
THIS KIT DOES NOT PROVIDE ANY REAR LIFT.
WE SUGGEST RUNNING A COMPLETE 8″ REAR LEAF PACK WHICH CAN BE PURCHASED FROM ATLAS SPRING COMPANY.

THIS KIT USES OUR UNIQUE ONE PIECE SUB-FRAME DESIGN.
NEXT WE ADD STRUT BAR SUPPORTS, REINFORCED UPPER CONTROL ARM DROP MOUNTS, AND A STEERING DROP DOWN W/ HEIM JOINTED SUPPORT LINKS.

THE CST SYSTEM WILL DROP DOWN THE FACTORY SUSPENSION A TRUE NINE INCHES, INSURING THAT FACTORY STEERING AND 4 WHEEL DRIVE CV ANGLES WILL REMAIN WITHIN FACTORY SPECS.
THIS KIT DOES NOT INCREASE THE TRACK WIDTH AND WITH THE USE OF CST SHOCKS OVER ALL RIDE QUALITY WILL BE IMPROVED.
2009 UP MODELS ARE EQUIPPED WITH THE GM STABILITRAK SYSTEM, INSTALLATION OF THIS KIT WILL NOT AFFECT IT IN ANY WAY.

Kit Features
DESIGNED TO FIT 37″ TIRES WITH UP TO 10″ WIDE WHEELS!
ALL CST GM HD KITS SUB-FRAME STYLE LIFT KITS INCLUDE A NEW CENTER-LINK THAT’S SUPPORTED WITH HEIM-JOINTS OFF OF THE SUB-FRAME TO REDUCE LATERAL MOVEMENT OF THE O.E. STEERING ARMS.
NO NEED FOR AFTER-MARKET STEERING SUPPORT, IT’S INCLUDED IN THE KIT!
ALL PARTS ARE COVERED IN A HIGH QUALITY TWO-STAGE GLOSS BLACK POWDER COAT FINISH!
STEERING STABILIZER INCLUDED WITH KIT!
O.E.M. RIDE QUALITY
NO MODIFICATIONS TO THE FRONT DIFF
O.E. TRACK WIDTH
MADE IN AMERICA

Notes
5” MAX BACK-SPACING
ADDITIONAL REAR LIFT REQUIRED FOR A LEVEL STANCE ON SOME VEHICLES AND WHEN SUSPENSION IS SET AT 8 INCHES.
APPROVED FOR 2WD AND 4WD GM HD’s
CST FRONT DRIVE-SHAFT REQUIRED FOR 4WD USE AT HIGHWAY SPEEDS (LISTED BELOW)
3500 REQUIRES REAR U-BOLTS

UPGADES & ADDITIONAL OPTIONS
CSS-C2-14 | SINGLE SHOCK UPPER ARM W/ UNIBALLS
CSS-C4-6 | DUAL SHOCK UPPER ARM W/ UNIBALLS
CSS-C5-5 | DUAL SHOCK HOOP
CSP-C28-1 | FRONT DRIVE SHAFT (6.6L OR 8.1L)
CSP-C28-3 | FRONT DRIVE SHAFT (6.0L / NON-ALISON)
CSS-C22-7 | SHIFT LEVER BRACKET (07-2010 2500HD WITH CST DRIVE-SHAFT)
CSS-C29-4 | CST FRONT SKID PLATE w/ CST LOGO
CSR-A27-2 | CST BLACK* BILLET RESERVOIR CLAMPS (2.0 TO 2.0)

SUGGESTED TIRE AND WHEEL OPTIONS
38” Tires on 9-10” wide wheels w/ 4 to 5 inches of back-spacing. (minor trimming required on some tires with 10” wide wheels)
37” Tires on 8-9” wide wheels w/ 4 to 5 inches of back-spacing and suspension set at 8 inches of lift w/ minor trimming.

Anything larger, taller or wider is up to your installer!