CSK-D5-3 | CST Suspension 5.5 Inch Stage 3 Suspension System (2013-2018 Ram 1500 2WD)

THIS KIT ALSO FITS RAM WARLOCK 19-22 MODELS

WE SET OUT TO OFFER OUR CUSTOMERS SUSPENSION LIFT OPTIONS THAT WOULD PROVIDE INCREASED GROUND & TIRE CLEARANCE WHILE MAINTAINING THE STOCK RIDE, HANDLING & LOAD RATING! FIRST WE PROVIDE 4″ OF LIFT USING OUR CAST-IRON LIFT SPINDLES THEN ADD LIFT COILS TO GET TO A TOTAL OF 5.5″ OF FRONT LIFT. IN ADDITION TO THE FRONT SPINDLES AND COILS YOU MUST RUN THE CST STEEL BRAIDED BRAKE LINES (PART# CSS-D11-1) INCLUDED IN THIS KIT. FOR THE REAR OF THE TRUCK THIS CST KIT USES 4″ FABRICATED SPACERS AND A FABRICATED PAN-HARD BAR DROP, KEEPING THE FACTORY REAR LOAD RATING & RIDE QUALITY.

KIT FEATURES
INCREASED GROUND & TIRE CLEARANCE.
PARTS COVERED IN A HIGH QUALITY GLOSS BLACK POWDER COAT FINISH.
NO WELDING REQUIRED.
ABILITY TO RETURN TRUCK TO STOCK.
MAINTAINS FACTORY LOAD RATING & REAR COIL RATE.
LEVEL STANCE ON MOST TRUCKS. (FRONT KIT AVAILABLE IN 4 OR 5.5″)
STEEL BRAIDED FRONT BRAKE LINES.
DESIGNED TO FIT 35″ TIRES WITH 9″ WIDE WHEELS.
ALL PARTS MADE IN THE USA!

CSK-D5-3 STAGE 3 SUSPENSION BREAK DOWN

CSS-D1-5 | 4″ CAST-IRON LIFT SPINDLES
CSS-D11-1 | STEEL BRAIDED FRONT BRAKE LINE (06 TO 18)
CSC-D3-3 | FRONT LIFT COILS
CSS-D16-1 | 4″ REAR KIT
CSA-5533 / REAR 2.0 SHOCKS

OPTIONAL KIT COMPONENTS
CSA-5536 | 2.0 EMULSION FRONT SHOCKS (SOLD EACH)
CSA-5533 | 2.0 EMULSION REAR SHOCKS (SOLD EACH)
CSA-6533 | 2.0 RESERVOIR REAR SHOCKS (SOLD EACH)

NOTES
THE FRONT COIL SPRINGS IN THIS KIT WORK BEST WITH HEMI APPLICATIONS ON THE 2013-2018 RAM 1500 2WD. DO NOT COMBINE THESE FRONT SPRINGS WITH ANY SPACERS.
REAR SHOCKS ARE REQUIRED BUT ARE NOT INCLUDED IN THIS KIT. (SEE ABOVE)
17″ WHEELS CAN NOT HAVE MORE THAN A 4.75″ BACKSPACING.
THIS KIT IS APPROVED FOR THE 2013-2018 RAM 1500 2WD CREW CAB WITH A HEMI ENGINE, V6 OR ECO-DIESEL. LIFT HEIGHT MAY VARY ON SMALLER CAB & ENGINE SIZES.

SUGGESTED WHEEL & TIRE SIZES
33×12.5” OR SIMILAR ON 9-10” WIDE WHEELS
315 / 70 / 17 ON 8-10” WIDE WHEELS
35” X12.5” ON 9 OR 10” WIDE WHEELS (MINOR TRIMMING REQUIRED)

ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
MAXIMUM BACKSPACING / 17″ WHEELS IS 4.75″ / 18″ OR LARGER IS 5″