CSK-D7-4 | CST Suspension 7 Inch Stage 4 Suspension System (2009-2012 Ram 1500 2WD)

WE SET OUT TO OFFER OUR CUSTOMERS SUSPENSION LIFT OPTIONS THAT WOULD PROVIDE INCREASED GROUND & TIRE CLEARANCE WHILE MAINTAINING THE STOCK RIDE, HANDLING & LOAD RATING! FIRST WE PROVIDE 4″ OF LIFT USING OUR CAST-IRON LIFT SPINDLES THEN ADD COIL SPACER TO GET TO A TOTAL OF 4″ OF FRONT LIFT. IN ADDITION TO THE FRONT SPINDLES AND SPACERS YOU MUST RUN THE CST STEEL BRAIDED BRAKE LINES (PART# CSS-D11-1) INCLUDED IN THIS KIT. FOR THE REAR OF THE TRUCK THIS CST KIT USES 4″ FABRICATED SPACERS AND A FABRICATED PAN-HARD BAR DROP, KEEPING THE FACTORY REAR LOAD RATING & RIDE QUALITY.

KIT FEATURES
INCREASED GROUND & TIRE CLEARANCE.
PARTS COVERED IN A HIGH QUALITY GLOSS BLACK POWDER COAT FINISH.
NO WELDING REQUIRED.
ABILITY TO RETURN TRUCK TO STOCK.
MAINTAINS FACTORY LOAD RATING & REAR COIL RATE.
LEVEL STANCE ON MOST TRUCKS
STEEL BRAIDED FRONT BRAKE LINES.
DESIGNED TO FIT 35″ TIRES WITH 9″ WIDE WHEELS.
ALL PARTS MADE IN THE USA!

CSK-D7-4 STAGE 4 SUSPENSION BREAK DOWN

CSS-D1-5 | 4″ CAST-IRON LIFT SPINDLES
CSS-D11-1 | FRONT BRAKELINE KIT
CSE-C16-4 | FRONT COIL SPACERS
CSS-D2-5 | UNI BALL UPPER CONTROL ARMS
CSA-5533 | DIRT SERIES REAR SHOCKS
CSS-D16-1 | 4″ REAR KIT

OPTIONAL KIT COMPONENTS
CSA-5536 | 2.0 EMULSION FRONT SHOCKS (SOLD EACH)
CSA-6533 | 2.0 RESERVOIR REAR SHOCKS (SOLD EACH)

NOTES
REAR SHOCKS ARE REQUIRED BUT ARE NOT INCLUDED IN THIS KIT. (SEE ABOVE)
17″ WHEELS CAN NOT HAVE MORE THAN A 4.75″ BACKSPACING.
THIS KIT IS APPROVED FOR THE 09-12 RAM 1500 2WD CREW CAB WITH A HEMI ENGINE, V6 OR ECO-DIESEL. LIFT HEIGHT MAY VARY ON SMALLER CAB & ENGINE SIZES.

SUGGESTED WHEEL & TIRE SIZES
33×12.5” OR SIMILAR ON 9-10” WIDE WHEELS
315 / 70 / 17 ON 8-10” WIDE WHEELS
35” X12.5” ON 9 OR 10” WIDE WHEELS (MINOR TRIMMING REQUIRED)

ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
MAXIMUM BACKSPACING / 17″ WHEELS IS 4.75″ / 18″ OR LARGER IS 5″