CS-DUC35SPKG-03-D-LA | Carli Suspension Unchained Carli Tuned Long Arm King 3.5" Remote Reservoir Shocks Package For Ram 2500/3500 4WD | 2003-2012 | 3.0" Lift, With Mounts & Limit Straps

Where the Performance 2.5” Long Arm System is more balanced, the tuning in the UnChained System is enough to put the build quality of the rest of the truck to the test and will ride a bit stiffer on the road than our other high-end systems; albeit, still much better than stock. At this level of suspension, customers should install a cage as the off-road capability far exceeds the capability of the truck itself. The Front Boasts massive, long-travel 3.5” King Shocks with an off-road oriented tune; the rear, 3.0” 4-Tube King Bypass Shocks. The 4-tube bypass will have far more bottom-out resistance than their smooth-body counterparts and their capability is user tunable to achieve exactly the rear ride desired by the purchaser.

Shock Towers and Rear Crossmember Gussets Required to install. Coil Buckets must also be bored to 4.5″ upper and lower. Both Axle Truss and Rear Shock Mounts HIGHLY Recommended.

- Carli Custom Tuned
- King 3.5" Remote Reservoir Front Shocks
- Carli Tuned - King 3.0", 4-Tube Bypass Reservoir Rear Shocks
- 17-4 Stainless Steel Shock Shafts
- Short Reservoir Mounts & Limit Straps Included
- Fitment: 2003-12 Ram 2500/3500 4x4, Diesel
- Requires 3" Carli Linear Coils and 1" Full Spring Pack

Where the Performance 2.5” Long Arm System is more balanced, the tuning in the UnChained System is enough to put the build quality of the rest of the truck to the test and will ride a bit stiffer on the road than our other high-end systems; albeit, still much better than stock. At this level of suspension, customers should install a cage as the off-road capability far exceeds the capability of the truck itself. The Front Boasts massive, long-travel 3.5” King Shocks with an off-road oriented tune; the rear, 3.0” 4-Tube King Bypass Shocks. The 4-tube bypass will have far more bottom-out resistance than their smooth-body counterparts and their capability is user tunable to achieve exactly the rear ride desired by the purchaser.

Customization Information

Rear Gusset Kit

*Highly Recommended*

03-12 RAM 2500/3500 4X4 DOMINATOR REAR CROSSMEMBER GUSSET KIT - WELD IN

SKU: CS-D30GUSSET
- 1/4" Cold-Rolled Steel Gussets
- Replace and box section of spare tire crossmember removed for 3.0" shock clearance

Fabricated Shock Tower

*Highly Recommended*

94-12 RAM 2500/3500 FABRICATED SLIDE-OVER SHOCK TOWER - 6.25" TALL (EXTENDED TRAVEL APPLICATION)

SKU: CS-DFST625
- 3" Long Arm Kit Specific (for Short-Body 12" Shocks)
- 1/4" Cold Rolled Steel
- Slide Over Design
- Fully Gusseted and Braced
- 3/8" Stud Ring for extreme durability
- Black Powdercoat Finish
- Height: 6.25" from base to center of shock bolt

Rear Shock Mount - Driver

*Highly Recommended*

03-12 RAM 2500/3500 4X4 WELD-IN REAR SHOCK MOUNT, DRIVER

SKU: CS-DRSM-03-D
- Replaces weak Driver's side factory shock mount
- Necessity when running 3.0" rear shocks
- Combines 3/16" and 1/4" Steel for Strength
- WILL NOT FIT 2013-2500/3500
- WELD-ON Fabrication Part

Rear Shock Mount - Passenger

*Highly Recommended*

03-12 RAM 2500/3500 4X4 WELD-IN REAR SHOCK MOUNT, PASSENGER

SKU: CS-DRSM-03-P
- Replaces Passenger side factory shock mount
- Combines 3/16" and 1/4" Steel for Strength
- Good insurance when installing Driver's side
- WELD-ON Fabrication Part

Reservoir Rock Guard

*OPTIONAL*

UNIVERSAL - 2.5" DIAMETER SHOCK RESERVOIR GUARD

SKU: CS-RRG
- Shock Reservoir Protection
- Stainless Hose Clamps
- Sold Individually
- Recommended for Rear shock leaning forward from the axle
- Fitment: Any 2.5", 3.0" or 3.5" Shock with 2.5" Reservoir

Hole Saw/Arbor

4" HOLE SAW AND ARBOR

SKU: CS-HOLESAWKIT-45
- Bore Ram Upper and Lower Coil Buckets to 4.5"
- Coil Bucket Fit 3.5" Diameter King Shocks once bored
- Milwaukee 7/16" Shank Arbor
- Milwaukee 4.5" Bi Metal Whole Saw