DJM2007-23 | DJM Suspension 2 Inch Front / 3 Inch Rear Lowering Kit (2007-2014 Suburban, Tahoe, Yukon 2WD)

2007 - 2014 Chevy Tahoe, Suburban Complete 2/3 DJM Kit with cast iron spindle

2014 and newer Tahoe's and Suburbans come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts. Click on the images below to help you identify your spindle!

Have cast iron spindles? You're in the right place!
Have Aluminum spindles? Use DJM2015-2/3 for the correct kit!

Here’s the deep drop for your Tahoe, Suburban. A three inch front drop with Calmax control arms and a four inch rear drop with coil springs and supporting hardware. The 2" Calmax control arm set has both upper and lower control arms. The lowers give you the 3" drop while keeping your factory coil. Great news because with your factory coil you get full suspension travel and a great ride. The upper control arms optimize the ball joint angles and more importantly allow you to align your lowered Tahoe, Suburban to original GM specs. This is really very good because it means you can also do a little performance alignment if you want to kick up your heels a bit.

The rear is basic and easy, install a set of 4? engineered coil springs and use the hardware kit to step the trailing arms down away from the frame, and install the swaybar endlinks to keep it out of the way of the other moving parts!