DJM2507-47 | DJM Suspension 4 Inch Front / 7 Inch Rear Lowering Kit (2007-2014 Silverado, Sierra 1500 2WD)

2007 - 2017 Chevy Silverado / Sierra Complete 4/7 DJM Kit with Cast Iron Spindles
2WD only - not intended for 4WD platform

2014 and newer Silverado's come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts. Click on the images below to help you identify your spindle!

Have cast iron spindles? You're in the right place! Have Aluminum spindles?
Click here DJM2515-4/7 for the correct kit!

You want the Deep Drop, like in the weeds kinda drop, right? You know of course there will be sacrifices made, right. The big sacrifice here? Your four inches closer to the ground, still sporting the factory coil springs and able to set your alignment to factory specs, not much of a sacrifice! Calmax Control Arms make this possible, you just can't get that with spindles and springs. If you could we would build it. Upper and lower control arms are the key, this set of arms allowed us to build you a 4"" drop around the factory strut that retains full suspension travel and factory ball joint angles. Ball joints move freely without binding and your able to dial in the factory alignment specs! You'll love they way you look!



This is the deepest flip you can get for your Silverado, a whopping 7" wow! All you need is the famous DJM pinion adjustable axle brackets, U-bolts, and spring plates with all hardware needed included and you will enjoy a full 7" lowering. A 4/7 kit will turn heads when you drive by!