Home - Return to Previous Page
75170 843030189822
75170 | 4in Toyota Suspension Lift Kit w/ V2 Shocks (16-21 Tundra 4WD/2WD)
Toyota | 2016-2021 Tundra 2/4wd
75170
Limited Supply: only 1 remaining
Availability:
Free Ground Shipping | Exclusions Apply*
Pricing:
$1885.95
Description
You'll never look at a Tundra the same way after installing Rough Country's 4-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance. The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups.
Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
FEATURES
Unmatched ground clearance due to high clearance crossmember design.
100% precision laser cut materials used in latest computer aided design process.
Levels the front with the rear of the vehicle
Will work with factory 18-inch or larger wheels.
Requires no modification to the stock differential mounts, drivetrain or exhaust.
Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
OPTIONAL V2 MONOTUBE SHOCKS
Incredible ride quality & performance
Monotube design
Nitrogen-charged
46mm high-flow piston
Mounts inverted
36kN Tensile Strength
3-year Manufacturer's Warranty
NOTES - IMPORTANT
N3 Loaded Struts are ONLY for 4WD models.
Cutting and drilling is required.
Does NOT fit Pro Series models
Does NOT fit XSP-X models.
Requires 18-inch or larger wheels.
Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
In some cases minor trimming may be needed to clear 35-inch tires.
On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
SPECS
SKU 75170
Est. Install Time 8-10 hours
Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
FEATURES
Unmatched ground clearance due to high clearance crossmember design.
100% precision laser cut materials used in latest computer aided design process.
Levels the front with the rear of the vehicle
Will work with factory 18-inch or larger wheels.
Requires no modification to the stock differential mounts, drivetrain or exhaust.
Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
OPTIONAL V2 MONOTUBE SHOCKS
Incredible ride quality & performance
Monotube design
Nitrogen-charged
46mm high-flow piston
Mounts inverted
36kN Tensile Strength
3-year Manufacturer's Warranty
NOTES - IMPORTANT
N3 Loaded Struts are ONLY for 4WD models.
Cutting and drilling is required.
Does NOT fit Pro Series models
Does NOT fit XSP-X models.
Requires 18-inch or larger wheels.
Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
In some cases minor trimming may be needed to clear 35-inch tires.
On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
SPECS
SKU 75170
Est. Install Time 8-10 hours