DJM2515-35 | DJM Suspension 3 Inch Front / 5 Inch Rear Lowering Kit (2015-2018 Silverado, Sierra 1500 2WD with OEM Cast Aluminum Steering Knuckles)

2007 - 2015 Chevy Silverado / Sierra Complete 3/5 DJM Kit with Cast Alumnum Spindles - 2016/2017 Silverado
2WD only - not intended for 4WD platform

2014 and 2015 Silverado's come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts. Click on the images below to help you identify your spindle!

If you have a 2016/17 Silverado this is the correct kit

You want the Deep Drop, like in the weeds kinda drop, right? You know of course there will be sacrifices made, right. The big sacrifice here? Your three inches closer to the ground, still sporting the factory coil springs and able to set your alignment to factory specs, not much of a sacrifice! Calmax Control Arms make this possible, you just can't get that with spindles and springs. If you could we would build it. Upper and lower control arms are the key, this set of arms allowed us to build you a 3" drop around the factory strut that retains full suspension travel and factory ball joint angles. Ball joints move freely without binding and your able to dial in the factory alignment specs! You'll love they way you look!

The rear kit consists of an axle flip kit featuring those DJM exclusive pinion adjustable axle brackets and new shackle hangers that invert the shackle mounting point allowing the longer shackles included to lift the rear end to the five-inch drop position.

(A clever way to get around those welded hangers!)