This is a complete coil spring leveling kit for the 1978-1979 Ford Bronco 4wd
Provides 1.5” lift height
Includes front and rear Superlift shocks
What does it include?
Front coil springs, shocks, and all hardware required specific to the 1978-1979 4wd Ford Bronco.
Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
This is the SUPERLIFT 1.5 Inch suspension lift kit for the 1978-1979 Ford Bronco. With a SUPERLIFT suspension and a little more tire, your classic Ford Bronco will have an awesome stance and better off-road ground clearance. Our kit addresses all of your lift kit needs in terms of product quality, durability, craftsmanship, and price. It includes everything you need to lift your legendary Ford Bronco – no other parts are required: But SUPERLIFT does have personalized options and up-grades to enhance your steering performance.
SUPERLIFT engineers develop these 1.5-inch front lift coil springs to provide 1.5 inches of lift to help level-off the factory ‘nose-down’ stance, or to offset the weight of a winch or snow plow. They’re pre-set to reduce fatigue in the steel, minimize settling and guarantee a consistent ride height. Shot-peened to increase tensile strength and allow maximum wheel travel without sacrificing the life of the springs.
Remember, this lift height is compared to ‘new’ condition factory coils; given the age of the vehicle, most factory springs have sagged somewhat so expect slightly more than 1.5 inches of lift.
Included in this system is a set of four (4) Superlift hydraulic shocks absorbers. Superlift shock absorbers are designed to provide excellent ride quality, durability, and longevity. They feature 10-stage, velocity-sensitive valving for maximum control on or off-road without sacrificing a comfortable ride. Shock resistance is continually adjusted, depending on the terrain and vehicle speed.
Components are a direct Remove & Replace item. Includes detailed instructions suitable for do-it-yourselfers (DIY) or for installers alike. This is an easy old school installation.
Front: Coil springs (1 pair); Superlift Shocks (2).
Rear: Front Lift Only; Superlift Shocks (2).
NOTE:
Installation time: 5 hours
Difficulty level: 2 of 5
If your 1978-1979 Ford Bronco is factory-equipped with auxiliary (dual) front shocks also order quantity one (1) Superide Shock Absorber #85270 and one (1) Superide Shock Absorber 85280.
1978-1979 Ford Bronco 4wd
