DJM2045H-55LTD | DJM Suspension 5 Inch Front / 5 Inch Rear Lowering Kit (1973-1987 C10 Pickup 2WD with 1.25 Inch Rotors)

1973 – 1987 C10 Complete DJM 5/5 Kit
Note: Measure the width of your disc brake rotor - why? read below

The good old drop spindle, as classic as the truck it’s self, sports a 3" drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1" or 1.25" rotor. If you have a 1" rotor use (DJM2045L-5/5). Pair the spindles up with a set of 2" engineered DJM drop springs, combined you end up with about 5" of total drop in the front!

The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No "C-section" required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced.