Home - Return to Previous Page
870 | 2.5-3in Toyota Leveling Lift Kit (07-21 Tundra 4WD)
2007-2021 Toyota Tundra 2WD/4WD
870
Pricing:
$181.95
Description
Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.
FEATURES
Easy bolt-on installation
Increased ground clearance
Maintains factory ride quality
Levels the front with the rear of the vehicle
Differential spacers maintain proper front CV axle angle.
Strut spacer kit requires no strut disassembly or strut compressor for installation. [870]
Strut spacer kit features adjustable shim plates that allow you to fine tune the front amount of lift. [870]
NOTES - IMPORTANT
Does NOT fit Pro Series models
Does NOT fit XSP-X models.
Strut spacer kit shims may not be required for TRD models
Optional lifted struts are non-adjustable and give 3-inches of front lift
SPECS
SKU 870
Est. Install Time 2-3 hours
Recommended Tire Size 305/65 R18
Recommended Wheel Backspacing Factory
FEATURES
Easy bolt-on installation
Increased ground clearance
Maintains factory ride quality
Levels the front with the rear of the vehicle
Differential spacers maintain proper front CV axle angle.
Strut spacer kit requires no strut disassembly or strut compressor for installation. [870]
Strut spacer kit features adjustable shim plates that allow you to fine tune the front amount of lift. [870]
NOTES - IMPORTANT
Does NOT fit Pro Series models
Does NOT fit XSP-X models.
Strut spacer kit shims may not be required for TRD models
Optional lifted struts are non-adjustable and give 3-inches of front lift
SPECS
SKU 870
Est. Install Time 2-3 hours
Recommended Tire Size 305/65 R18
Recommended Wheel Backspacing Factory
Vehicle Applications
2007 - 2021 Toyota Tundra
NOTES - IMPORTANT
Does NOT fit Pro Series models Does NOT fit XSP-X models.
Strut spacer kit shims may not be required for TRD models Optional lifted struts are non-adjustable and give 3-inches of front lift
NOTES - IMPORTANT
Does NOT fit Pro Series models Does NOT fit XSP-X models.
Strut spacer kit shims may not be required for TRD models Optional lifted struts are non-adjustable and give 3-inches of front lift
Components
FRONT
Upper strut extensions
Differential mounting spacers
Skid plate spacers
Bump Stops
Hardware
Upper strut extensions
Differential mounting spacers
Skid plate spacers
Bump Stops
Hardware
Details
- 870
- 870
- 843030115463
- Rough Country
- New
Categories
Shipping Information
- Item Requires Shipping
- 10.0 lbs.
- W6.0000” x H3.0000” x L12.0000”
- Free Ground Shipping | Exclusions Apply*