Home - Return to Previous Page
Click on image to zoom

1821080M | ST Suspensions ST XTA Coilover Kit

15+ Audi A3 (8V) 2.0T Quattro, 15+ Audi S3 (8V) 2.0T Quattro

1821080M
Pricing: $1,929.00
Qty:
Free Ground Shipping | Exclusions Apply*

Description

ST XTA COILOVERS

For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!

Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.

Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.

KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect

Front Lowering: 0.0" to 1.2"
Rear Lowering: 0.2" to 1.2"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel

Application List

2015 Audi A3 Quattro Premium 2.0l L4 CNTC Sedan GAS 164 KW 1984 ccm 4 AWD
2015-2018 Audi A3 Quattro Premium 2.0l L4 CNTC Convertible GAS 164 KW 1984 ccm 4 AWD
2019 Audi A3 Quattro Premium 2.0l L4 DHHA Convertible GAS 170 KW 1984 ccm 4 AWD
2016-2018 Audi A3 Quattro Premium 2.0l L4 CNTC Sedan GAS 164 KW 1984 ccm 4 AWD
2019 Audi A3 Quattro Premium 2.0l L4 DHHA Sedan GAS 170 KW 1984 ccm 4 AWD
2015-2018 Audi A3 Quattro Premium Plus 2.0l L4 CNTC Convertible GAS 164 KW 1984 ccm 4 AWD
2019 Audi A3 Quattro Premium Plus 2.0l L4 DHHA Convertible GAS 170 KW 1984 ccm 4 AWD
2015-2018 Audi A3 Quattro Premium Plus 2.0l L4 CNTC Sedan GAS 164 KW 1984 ccm 4 AWD
2019 Audi A3 Quattro Premium Plus 2.0l L4 DHHA Sedan GAS 170 KW 1984 ccm 4 AWD
2015-2018 Audi A3 Quattro Prestige 2.0l L4 CNTC Convertible GAS 164 KW 1984 ccm 4 AWD
2019 Audi A3 Quattro Prestige 2.0l L4 DHHA Convertible GAS 170 KW 1984 ccm 4 AWD
2015-2018 Audi A3 Quattro Prestige 2.0l L4 CNTC Sedan GAS 164 KW 1984 ccm 4 AWD
2019 Audi A3 Quattro Prestige 2.0l L4 DHHA Sedan GAS 170 KW 1984 ccm 4 AWD
2020 Audi S3 Premium 2.0l L4 DLRA Sedan GAS 215 KW 1984 ccm 4 AWD
2015-2018 Audi S3 Premium Plus 2.0l L4 CYFB Sedan GAS 218 KW 1984 ccm 4 AWD
2018 Audi S3 Premium Plus 2.0l L4 CYFB Sedan GAS 218 KW 1984 ccm 4 AWD
2018 Audi S3 Premium Plus 2.0l L4 DJJA Sedan GAS 218 KW 1984 ccm 4 AWD
2019-2020 Audi S3 Premium Plus 2.0l L4 DLRA Sedan GAS 215 KW 1984 ccm 4 AWD
2015-2018 Audi S3 Prestige 2.0l L4 CYFB Sedan GAS 218 KW 1984 ccm 4 AWD
2018 Audi S3 Prestige 2.0l L4 DJJA Sedan GAS 218 KW 1984 ccm 4 AWD
2019-2020 Audi S3 Prestige 2.0l L4 DLRA Sedan GAS 215 KW 1984 ccm 4 AWD
2020 Audi S3 Technic 2.0l L4 DLRA Sedan GAS 215 KW 1984 ccm 4 AWD

All vehicles equipped with the EDC system (electronic damper control) are NOT APPLICABLE
Vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510370.
Only for cars with clamp diameter of 54.6mm on the front axle

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 60.0 lbs.
  • W30.0000” x H18.0000” x L6.0000”
  • Free Ground Shipping | Exclusions Apply*

Documents