Home - Return to Previous Page
18220821 | ST Suspensions ST XTA Coilover Kit
98-06 BMW E46 Sedan, Coupe, Convertible, 00-05 E46 Sport Wagon
18220821
Pricing:
$1,929.00
Description
ST XTA COILOVERS
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect
Front Lowering: 1.2" to 2.8"
Rear Lowering: 1.2" to 2.0"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect
Front Lowering: 1.2" to 2.8"
Rear Lowering: 1.2" to 2.0"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel
Application List
1999 BMW 323i Base 2.5l L6 M52 Sedan GAS 125 KW 2494 ccm 6 RWD
1999 BMW 323i Base 2.5l L6 M52 Convertible GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323i Base 2.5l L6 M52 Sedan GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323i Base 2.5l L6 M52 Wagon GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323Ci Base 2.5l L6 M52 Convertible GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323Ci Base 2.5l L6 M52 Coupe GAS 125 KW 2494 ccm 6 RWD
2001-2006 BMW 325Ci Base 2.5l L6 M54 Convertible GAS 137 KW 2494 ccm 6 RWD
2003-2006 BMW 325Ci Base 2.5l L6 M56 Convertible GAS 137 KW 2494 ccm 6 RWD
2001-2006 BMW 325Ci Base 2.5l L6 M54 Coupe GAS 137 KW 2494 ccm 6 RWD
2003-2006 BMW 325Ci Base 2.5l L6 M56 Coupe GAS 137 KW 2494 ccm 6 RWD
2001-2005 BMW 325i Base 2.5l L6 M54 Sedan GAS 137 KW 2494 ccm 6 RWD
2003-2005 BMW 325i Base 2.5l L6 M56 Sedan GAS 137 KW 2494 ccm 6 RWD
2001-2005 BMW 325i Base 2.5l L6 M54 Wagon GAS 137 KW 2494 ccm 6 RWD
2003-2005 BMW 325i Base 2.5l L6 M56 Wagon GAS 137 KW 2494 ccm 6 RWD
2000 BMW 328Ci Base 2.8l L6 M52 Coupe GAS 142 KW 2793 ccm 6 RWD
1999 BMW 328i Base 2.8l L6 M52 Convertible GAS 142 KW 2793 ccm 6 RWD
1999-2000 BMW 328i Base 2.8l L6 M52 Sedan GAS 142 KW 2793 ccm 6 RWD
2001-2006 BMW 330Ci Base 3.0l L6 M54 Convertible GAS 168 KW 2979 ccm 6 RWD
2001-2006 BMW 330Ci Base 3.0l L6 M54 Coupe GAS 168 KW 2979 ccm 6 RWD
2001-2005 BMW 330i Base 3.0l L6 M54 Sedan GAS 168 KW 2979 ccm 6 RWD
Because of the construction of the car the damping adjustment can only made when the damper is not mounted. By modifying the interior trim this problem can be avoided.
In combination with the original wheel and tires, wheel spacers might need to be used.
1999 BMW 323i Base 2.5l L6 M52 Convertible GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323i Base 2.5l L6 M52 Sedan GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323i Base 2.5l L6 M52 Wagon GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323Ci Base 2.5l L6 M52 Convertible GAS 125 KW 2494 ccm 6 RWD
2000 BMW 323Ci Base 2.5l L6 M52 Coupe GAS 125 KW 2494 ccm 6 RWD
2001-2006 BMW 325Ci Base 2.5l L6 M54 Convertible GAS 137 KW 2494 ccm 6 RWD
2003-2006 BMW 325Ci Base 2.5l L6 M56 Convertible GAS 137 KW 2494 ccm 6 RWD
2001-2006 BMW 325Ci Base 2.5l L6 M54 Coupe GAS 137 KW 2494 ccm 6 RWD
2003-2006 BMW 325Ci Base 2.5l L6 M56 Coupe GAS 137 KW 2494 ccm 6 RWD
2001-2005 BMW 325i Base 2.5l L6 M54 Sedan GAS 137 KW 2494 ccm 6 RWD
2003-2005 BMW 325i Base 2.5l L6 M56 Sedan GAS 137 KW 2494 ccm 6 RWD
2001-2005 BMW 325i Base 2.5l L6 M54 Wagon GAS 137 KW 2494 ccm 6 RWD
2003-2005 BMW 325i Base 2.5l L6 M56 Wagon GAS 137 KW 2494 ccm 6 RWD
2000 BMW 328Ci Base 2.8l L6 M52 Coupe GAS 142 KW 2793 ccm 6 RWD
1999 BMW 328i Base 2.8l L6 M52 Convertible GAS 142 KW 2793 ccm 6 RWD
1999-2000 BMW 328i Base 2.8l L6 M52 Sedan GAS 142 KW 2793 ccm 6 RWD
2001-2006 BMW 330Ci Base 3.0l L6 M54 Convertible GAS 168 KW 2979 ccm 6 RWD
2001-2006 BMW 330Ci Base 3.0l L6 M54 Coupe GAS 168 KW 2979 ccm 6 RWD
2001-2005 BMW 330i Base 3.0l L6 M54 Sedan GAS 168 KW 2979 ccm 6 RWD
Because of the construction of the car the damping adjustment can only made when the damper is not mounted. By modifying the interior trim this problem can be avoided.
In combination with the original wheel and tires, wheel spacers might need to be used.
Details
- 18220821
- 18220821
- 847691037348
- ST Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- 60.0 lbs.
- W30.0000” x H18.0000” x L6.0000”
- Free Ground Shipping | Exclusions Apply*