Home - Return to Previous Page
18245801 | ST Suspensions ST XTA Coilover Kit
Subaru Impreza GC GF GCF
18245801
Pricing:
$1,929.00
Description
ST XTA COILOVERS
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect
Front Lowering: 1.6" to 2.8"
Rear Lowering: 1.6" to 2.4"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect
Front Lowering: 1.6" to 2.8"
Rear Lowering: 1.6" to 2.4"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel
Application List
1993-1994 Subaru Impreza Base 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 FWD
1995 Subaru Impreza Base 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 AWD
1995 Subaru Impreza Base 1.8l H4 - Coupe GAS U/K KW 1781 ccm 4 AWD
1996-1997 Subaru Impreza Brighton 1.8l H4 - Coupe GAS U/K KW 1781 ccm 4 AWD
1997 Subaru Impreza Brighton 2.2l H4 EJ22E Coupe GAS U/K KW 2212 ccm 4 AWD
1997 Subaru Impreza Brighton 2.2l H4 EJ22EZ Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza L 1.8l H4 - Coupe GAS U/K KW 1781 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 - Coupe GAS U/K KW 2212 ccm 4 AWD
1999-2001 Subaru Impreza L 2.2l H4 EJ222 Coupe GAS U/K KW 2212 ccm 4 AWD
1999 Subaru Impreza L 2.2l H4 EJ223 Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 EJ22E Coupe GAS U/K KW 2212 ccm 4 FWD
1997-1998 Subaru Impreza L 2.2l H4 EJ22EZ Coupe GAS U/K KW 2212 ccm 4 AWD
1993-1996 Subaru Impreza L 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 - Sedan GAS U/K KW 2212 ccm 4 AWD
1999-2001 Subaru Impreza L 2.2l H4 EJ222 Sedan GAS U/K KW 2212 ccm 4 AWD
1999 Subaru Impreza L 2.2l H4 EJ223 Sedan GAS U/K KW 2212 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 EJ22E Sedan GAS U/K KW 2212 ccm 4 AWD
1997-1998 Subaru Impreza L 2.2l H4 EJ22EZ Sedan GAS U/K KW 2212 ccm 4 AWD
1993-1994 Subaru Impreza LS 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 - Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 EJ22E Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 - Sedan GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 EJ22E Sedan GAS U/K KW 2212 ccm 4 AWD
2000-2001 Subaru Impreza RS 2.5l H4 EJ251 Coupe GAS U/K KW 2458 ccm 4 AWD
1999 Subaru Impreza RS 2.5l H4 EJ253 Coupe GAS 123 KW 2458 ccm 4 AWD
1998 Subaru Impreza RS 2.5l H4 EJ25D Coupe GAS U/K KW 2458 ccm 4 AWD
In combination with the original wheel and tires, wheel spacers might need to be used.
1995 Subaru Impreza Base 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 AWD
1995 Subaru Impreza Base 1.8l H4 - Coupe GAS U/K KW 1781 ccm 4 AWD
1996-1997 Subaru Impreza Brighton 1.8l H4 - Coupe GAS U/K KW 1781 ccm 4 AWD
1997 Subaru Impreza Brighton 2.2l H4 EJ22E Coupe GAS U/K KW 2212 ccm 4 AWD
1997 Subaru Impreza Brighton 2.2l H4 EJ22EZ Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza L 1.8l H4 - Coupe GAS U/K KW 1781 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 - Coupe GAS U/K KW 2212 ccm 4 AWD
1999-2001 Subaru Impreza L 2.2l H4 EJ222 Coupe GAS U/K KW 2212 ccm 4 AWD
1999 Subaru Impreza L 2.2l H4 EJ223 Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 EJ22E Coupe GAS U/K KW 2212 ccm 4 FWD
1997-1998 Subaru Impreza L 2.2l H4 EJ22EZ Coupe GAS U/K KW 2212 ccm 4 AWD
1993-1996 Subaru Impreza L 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 - Sedan GAS U/K KW 2212 ccm 4 AWD
1999-2001 Subaru Impreza L 2.2l H4 EJ222 Sedan GAS U/K KW 2212 ccm 4 AWD
1999 Subaru Impreza L 2.2l H4 EJ223 Sedan GAS U/K KW 2212 ccm 4 AWD
1995-1997 Subaru Impreza L 2.2l H4 EJ22E Sedan GAS U/K KW 2212 ccm 4 AWD
1997-1998 Subaru Impreza L 2.2l H4 EJ22EZ Sedan GAS U/K KW 2212 ccm 4 AWD
1993-1994 Subaru Impreza LS 1.8l H4 - Sedan GAS U/K KW 1781 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 - Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 EJ22E Coupe GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 - Sedan GAS U/K KW 2212 ccm 4 AWD
1995-1996 Subaru Impreza LX 2.2l H4 EJ22E Sedan GAS U/K KW 2212 ccm 4 AWD
2000-2001 Subaru Impreza RS 2.5l H4 EJ251 Coupe GAS U/K KW 2458 ccm 4 AWD
1999 Subaru Impreza RS 2.5l H4 EJ253 Coupe GAS 123 KW 2458 ccm 4 AWD
1998 Subaru Impreza RS 2.5l H4 EJ25D Coupe GAS U/K KW 2458 ccm 4 AWD
In combination with the original wheel and tires, wheel spacers might need to be used.
Details
- 18245801
- 18245801
- 847691072400
- ST Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- 60.0 lbs.
- W30.0000” x H18.0000” x L6.0000”
- Free Ground Shipping | Exclusions Apply*