Home - Return to Previous Page
1828080N | ST Suspensions ST XTA Coilover Kit
15+ VW Golf VII GTI (without DCC) 2.0T
1828080N
Pricing:
$1,929.00
Description
ST XTA COILOVERS
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect
Front Lowering: 0.6" to 1.8"
Rear Lowering: 0.8" to 2.0"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protect
Front Lowering: 0.6" to 1.8"
Rear Lowering: 0.8" to 2.0"
Version: XTA
Damping adjustment: Rebound Damping
Material: Galvanized Steel
Material: Galvanized Steel
Application List
2015-2017 Volkswagen Golf R Base 2.0l L4 CYFB Hatchback GAS 218 KW 1984 ccm 4 AWD
2018 Volkswagen Golf R Base 2.0l L4 DJJA Hatchback GAS 218 KW 1984 ccm 4 AWD
2019 Volkswagen Golf R Base 2.0l L4 DLRA Hatchback GAS 215 KW 1984 ccm 4 AWD
2015-2016 Volkswagen GTI Autobahn 2.0l L4 CXCA Hatchback GAS 156 KW 1984 ccm 4 FWD
2015-2018 Volkswagen GTI Autobahn 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
2019-2020 Volkswagen GTI Autobahn 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2019 Volkswagen GTI Rabbit Edition 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2015-2017 Volkswagen GTI S 2.0l L4 CXCA Hatchback GAS 156 KW 1984 ccm 4 FWD
2015-2018 Volkswagen GTI S 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
2019-2020 Volkswagen GTI S 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2015-2016 Volkswagen GTI SE 2.0l L4 CXCA Hatchback GAS 156 KW 1984 ccm 4 FWD
2015-2018 Volkswagen GTI SE 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
2019-2020 Volkswagen GTI SE 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2017 Volkswagen GTI Sport 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
All vehicles equipped with the EDC system (electronic damper control) are NOT APPLICABLE
Only for cars with clamp diameter of 54.6mm on the front axle
2018 Volkswagen Golf R Base 2.0l L4 DJJA Hatchback GAS 218 KW 1984 ccm 4 AWD
2019 Volkswagen Golf R Base 2.0l L4 DLRA Hatchback GAS 215 KW 1984 ccm 4 AWD
2015-2016 Volkswagen GTI Autobahn 2.0l L4 CXCA Hatchback GAS 156 KW 1984 ccm 4 FWD
2015-2018 Volkswagen GTI Autobahn 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
2019-2020 Volkswagen GTI Autobahn 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2019 Volkswagen GTI Rabbit Edition 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2015-2017 Volkswagen GTI S 2.0l L4 CXCA Hatchback GAS 156 KW 1984 ccm 4 FWD
2015-2018 Volkswagen GTI S 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
2019-2020 Volkswagen GTI S 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2015-2016 Volkswagen GTI SE 2.0l L4 CXCA Hatchback GAS 156 KW 1984 ccm 4 FWD
2015-2018 Volkswagen GTI SE 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
2019-2020 Volkswagen GTI SE 2.0l L4 DKFA Hatchback GAS 170 KW 1984 ccm 4 FWD
2017 Volkswagen GTI Sport 2.0l L4 CXCB Hatchback GAS 164 KW 1984 ccm 4 FWD
All vehicles equipped with the EDC system (electronic damper control) are NOT APPLICABLE
Only for cars with clamp diameter of 54.6mm on the front axle
Details
- 1828080N
- 1828080N
- 847691037393
- ST Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- 60.0 lbs.
- W30.0000” x H18.0000” x L6.0000”
- Free Ground Shipping | Exclusions Apply*