Home - Return to Previous Page
Chevrolet, GMC
23733 | 7 Inch GM Suspension Lift Kit w/ Lifted Struts, Premium N3 Shocks
Chevrolet, GMC
2014-2018 Silverado, Sierra 1500 2wd
Cast Steel Control Arms
23733
Pricing:
$1,857.95
Description
Gain ride height at an incredible value with Rough Country's 7-inch Suspension Lift for 2WD '14+ Chevy / GMC 1500 Pickups. This massive lift affords your 2WD truck the ability to run up to an impressive 35-inch tire on factory wheels with our beefy lifted knuckles and is designed with 100% laser-cut materials for the best possible fit on your vehicle. Includes a set of front and rear high-clearance crossmembers featuring the "RC" logo. This whopping 7-inch Lift also comes with a set of durable, fabricated anti-wrap lift blocks that offer a huge boost while helping prevent axle wrap issues. Give your pickup a lifted and leveled stance easily, with no modification to the stock differential mounts, drivetrain or exhaust required to install! Includes Rough Country's Lifetime Replacement Warranty.
FEATURES
Can run 33" tires on factory 20" wheels.
Provides highly sought level stance.
High clearance crossmember design gives unmatched ground clearance.
Requires no modification to the stock drivetrain or exhaust.
100% precision laser cut materials using the latest computer aided design process.
No need to disassemble your struts to install
Re-uses stock front skid plate
NOTES - IMPORTANT
IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501)
Does not fit Hybrid eAssist models
Requires minor cutting and drilling.
Must know if Stock Control Arms are Cast Aluminum, Stamped Steel or Cast Steel
Cast Steel Control arm kit (237.20) will give a total of 7.5-inches of lift
Does NOT fit GMC Denali models with Magnetic Ride Control.
2014+ models require removal of front skid plate bracket
18" or larger wheels are required.
Please view installation instructions for complete information on proper tire/wheel combinations.
SPECS
SKU 23733
Est. Install Time 8 - 10 hours
FEATURES
Can run 33" tires on factory 20" wheels.
Provides highly sought level stance.
High clearance crossmember design gives unmatched ground clearance.
Requires no modification to the stock drivetrain or exhaust.
100% precision laser cut materials using the latest computer aided design process.
No need to disassemble your struts to install
Re-uses stock front skid plate
NOTES - IMPORTANT
IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501)
Does not fit Hybrid eAssist models
Requires minor cutting and drilling.
Must know if Stock Control Arms are Cast Aluminum, Stamped Steel or Cast Steel
Cast Steel Control arm kit (237.20) will give a total of 7.5-inches of lift
Does NOT fit GMC Denali models with Magnetic Ride Control.
2014+ models require removal of front skid plate bracket
18" or larger wheels are required.
Please view installation instructions for complete information on proper tire/wheel combinations.
SPECS
SKU 23733
Est. Install Time 8 - 10 hours
Vehicle Applications
2014 - 2018 Chevrolet Silverado 1500
2014 - 2018 GMC Sierra 1500
NOTES - IMPORTANT
Does NOT fit GMC Denali models with Magnetic Ride Control.
Does NOT fit models with Aluminum or Stamped Steel Control Arms Requires cutting and drilling.
If truck is equipped with a mass damper on the front differential, the damper must be removed.
// Tire & Wheel Details \\\\ IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501) 18-inch or larger wheels are required.
Factory 20in wheels can be run but require 1/4in wheel spacers with 295 tires (#1065) If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required.
Please view installation instructions for complete information on proper tire/wheel combinations.
2014 - 2018 GMC Sierra 1500
NOTES - IMPORTANT
Does NOT fit GMC Denali models with Magnetic Ride Control.
Does NOT fit models with Aluminum or Stamped Steel Control Arms Requires cutting and drilling.
If truck is equipped with a mass damper on the front differential, the damper must be removed.
// Tire & Wheel Details \\\\ IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501) 18-inch or larger wheels are required.
Factory 20in wheels can be run but require 1/4in wheel spacers with 295 tires (#1065) If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required.
Please view installation instructions for complete information on proper tire/wheel combinations.
Components
FRONT
Lifted knuckles
Front crossmember
Rear crossmember
Lifted N3 Struts | Loaded
Brake line brackets
Sway-bar drop brackets
Hardware
REAR
5" lift blocks
U-bolts
Hardware
SHOCKS
(2) Rear Premium N3 series
Lifted knuckles
Front crossmember
Rear crossmember
Lifted N3 Struts | Loaded
Brake line brackets
Sway-bar drop brackets
Hardware
REAR
5" lift blocks
U-bolts
Hardware
SHOCKS
(2) Rear Premium N3 series
Tires & Wheels
315/70 R17 17x9 - +12 to +18mm
295/70 R18 Factory 18 - -
315/65 R18 18x9 - +12 to +18mm
295/60 R20 Factory 20 - -
315/55 R20 20x9 - +12 to +18mm
1 Factory 18in & 20in wheels can be run but require 1/4in wheel spacers with 295 tires
2 Models equipped with Factory 18-inch or larger wheels must run 18-inch or larger wheels if changing to aftermarket wheels
295/70 R18 Factory 18 - -
315/65 R18 18x9 - +12 to +18mm
295/60 R20 Factory 20 - -
315/55 R20 20x9 - +12 to +18mm
1 Factory 18in & 20in wheels can be run but require 1/4in wheel spacers with 295 tires
2 Models equipped with Factory 18-inch or larger wheels must run 18-inch or larger wheels if changing to aftermarket wheels
Details
- 23733
- 23733
- 843030169503
- Rough Country
- New
Categories
Shipping Information
- Item Requires Shipping
- 125.0 lbs.
- W24.0000” x H12.0000” x L48.0000”
- Free Ground Shipping | Exclusions Apply*