Home - Return to Previous Page
Click on image to zoom

BDS760FS | BDS Suspension 3 Inch Lift Kit For Chevrolet Silverado/GMC Sierra 2500 HD/3500 HD (2020-2024) | Rear Lift 3 Inch Block Kit Without Overload

3 Inch Lift Kit For Chevrolet Silverado/GMC Sierra 2500 HD/3500 HD (2020-2024) | Rear Lift 3 Inch Block Kit Without Overload

BDS760FS
Pricing: $2,872.00
Qty:
Free Ground Shipping | Exclusions Apply*

Description

BDS offers improved performance in a new smaller lift height with 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Designed for simple bolt-on installation, these kits allow clerance for up to 35" tires.
 
At the heart of this new system is a pair of heavy duty tubular upper control arms (UCAs) designed for improved strength and suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints to allow more droop travel.
 
These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied up front to lift vehicle. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance.
 
To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded.

Tire & Wheel Combinations

35x12.50 w/20x9 and 5.5-5.75" back spacing
295/60 w/20x9 and 5-5.75" back spacing
285/65 w/20x9 and 5-6.18" back spacing
*Trimming may be required*

Est. Installation:

3-4 hours

Difficulty Level (easy 1 - 5 complicated):

3

Important Kit Notes

  • Disassembly/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool # CH48809
  • Compatible with gas or diesel models
  • Compatible with AT4 models
  • Some minor trimming may be necessary to fit certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/ narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet
  • Compatible with DRW models, use w/ overload rear box kit #011217

Product Series

Application List

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2020ChevroletSilverado 2500 HDALLALLALLALLALL
2020ChevroletSilverado 3500 HDALLALLALLALLALL
2020GMCSierra 2500 HDALLALLALLALLALL
2020GMCSierra 3500 HDALLALLALLALLALL
2021ChevroletSilverado 2500 HDALLALLALLALLALL
2021ChevroletSilverado 3500 HDALLALLALLALLALL
2021GMCSierra 2500 HDALLALLALLALLALL
2021GMCSierra 3500 HDALLALLALLALLALL
2022ChevroletSilverado 2500 HDALLALLDIESELALLALL
2022ChevroletSilverado 2500 HDALLALLGASALLALL
2022ChevroletSilverado 3500 HDALLALLGASALLALL
2022ChevroletSilverado 3500 HDALLALLDIESELALLALL
2022GMCSierra 2500 HDALLALLDIESELALLALL
2022GMCSierra 2500 HDALLALLGASALLALL
2022GMCSierra 3500 HDALLALLDIESELALLALL
2022GMCSierra 3500 HDALLALLGASALLALL
2023ChevroletSilverado 2500 HDALLALLGASALLALL
2023ChevroletSilverado 2500 HDALLALLDIESELALLALL
2023ChevroletSilverado 3500 HDALLALLGASALLALL
2023ChevroletSilverado 3500 HDALLALLDIESELALLALL
2023GMCSierra 2500 HDALLALLDIESELALLALL
2023GMCSierra 2500 HDALLALLGASALLALL
2023GMCSierra 3500 HDALLALLDIESELALLALL
2023GMCSierra 3500 HDALLALLGASALLALL
2024ChevroletSilverado 2500 HDALLALLDIESELALLALL
2024ChevroletSilverado 2500 HDALLALLFLEXALLALL
2024ChevroletSilverado 2500 HDALLALLGASALLALL
2024ChevroletSilverado 3500 HDALLALLFLEXALLALL
2024ChevroletSilverado 3500 HDALLALLDIESELALLALL
2024ChevroletSilverado 3500 HDALLALLGASALLALL
2024GMCSierra 2500 HDALLALLFLEXALLALL
2024GMCSierra 2500 HDALLALLDIESELALLALL
2024GMCSierra 2500 HDALLALLGASALLALL
2024GMCSierra 3500 HDALLALLALLALLALL

Component List

1 BDS011310 2020-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 3" Box Kit
1 BDS011218 2011-2024 Chevrolet Silverado/GMC Sierra 2500/3500 HD 2" Rear Block w/o Overload
2 FOX98524240 20-ON GM 2500/3500 HD Front w/UCA, PS, 2.0, IFP, 5.6", 1.5-2.5" Lift
2 FOX98224758 Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1

Tires & Wheels

(Trimming may be required)
35 x 12.5 with 20 x 9 and 5.75 in. Backspace
295 / 60 with 20 x 9 and 5.75 in. Backspace
285 / 65 with 20 x 9 and 6.18 in. Backspace

Shipping Information

  • Item Requires Shipping
  • 90.0 lbs.
  • W36.0000” x H18.0000” x L48.0000”
  • Free Ground Shipping | Exclusions Apply*

Documents