50140 | Rough Country 4 Inch Lift Kit With Rear Leaf Springs For Ford F-250/F-350 Super Duty 4WD | 1999-2004 | Pre-Production 3-1-1999 | M1 Shocks
4 Inch Lift Kit With Rear Leaf Springs | 1999-2004 | Ford F-250/F-350 Super Duty 4WD | Does NOT Fit Dually & V-8 Gas Models | M1 Shocks
Description
Give your 99-04 Ford Super Duty an impressive upgrade, front to back with Rough Country’s 4" Ford Suspension Lift System! This easy-to-install lift kit raises the front of your vehicle to be equal height with the rear for a leveled, better-than-stock look that gives an improved ride height and more aggressive appearance.
This kit features a set of front and rear lifted leaf springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of sway bar drop brackets and track bar bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting.
A set of Rough Country's premium N3 shocks are also included. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.
Rough Country’s V2 Monotube Shocks are an available option for this kit. For those off-road hobbyists looking for a good step-up performance shock, the V2 Monotube will improve your ride quality with lighting-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle.
Get the wheels you want! Rough Country's 4" Ford Suspension Lift System comes with everything you need to fit up to a 35" tire with proper wheel backspacing.
Best of all, Rough Country's 4" Ford Suspension Lift System is backed by our Lifetime Replacement Warranty.
FEATURES
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
OPTIONAL V2 MONOTUBE SHOCKS
- Monotube design
- Internal floating piston
- Nitrogen-charged
- 46mm high-flow piston
- Fast heat dissipation
- 36kN Tensile Strength
- Mounts inverted
- T6061 brushed aluminum body
- 3-year Manufacturer's Warranty
NOTES - IMPORTANT
- Does NOT fit V-8 gas engine models.
- Does NOT fit dually models.
- Does NOT fit models with a production date before 3-1-1999
- A carrier bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. (#1197)
SPECS
Est. Install Time 6-8 hours
Vehicle Applications
1999 - 2004 Ford F-350 Super Duty
NOTES - IMPORTANT
Does NOT fit V-8 gas engine models.
Does NOT fit dually models.
Does NOT fit models with a production date before 3-1-1999 A carrier bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft.
(#1197)
Components
Lifted leaf springs
Sway-bar drop brackets
Track bar drop bracket
Pitman Arm
U-bolts
Hardware
REAR
Lifted leaf springs
U-bolts
Hardware
SHOCKS
(4) Shocks
Tire & Wheels
35x12.50R17 17x8.5 8x170 +1 -
35x12.50R17 17x9 8x170 -12 -
35x12.50R17 17x9 8x170 +0 -
35x12.50R17 17x9 8x170 +1 -
35x12.50R18 18x8.5 8x170 +0 -
35x12.50R18 18x8.5 8x170 +1 -
35x12.50R18 18x9 8x170 -12 -
35x12.50R18 18x9 8x170 +0 -
35x12.50R18 18x9 8x170 +1 -
35x12.50R18 18x10 8x170 -19 -
35x12.50R18 18x10 8x170 -18 -
35x12.50R20 20x9 8x170 -12 -
35x12.50R20 20x9 8x170 +0 -
35x12.50R20 20x9 8x170 +1 -
35x12.50R20 20x10 8x170 -19 -
35x12.50R20 20x10 8x170 -18 -
35x12.50R20 20x10 8x170 -44 Trimming Required
35x12.50R22 22x10 8x170 -19 -
35x12.50R22 22x10 8x170 -18 -
35x12.50R22 22x10 8x170 -44 Trimming Required
Details
- 50140
- 50140
- 840269920509
- Rough Country
- New
Categories
Shipping Information
- Item Requires Shipping
- 149.0 lbs.
- W12.0000” x H12.0000” x L48.0000”
- $75.00
- Free Ground Shipping Unavailable | Special Handling Is Required* (Add To Cart To View Details)